MAX6462UR26+T Overview

There are 3 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. When a supply voltage of 3.6V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. Taking into account all of the pins, this power management has a total of 3. Pin count of the power management is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supply current of the power management is 3.5μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6462, which is the base power ics number. A maximum supply temperature of 3.5μA can be used.

MAX6462UR26+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
3.5μA operating supply current

MAX6462UR26+T Applications

There are a lot of Maxim Integrated MAX6462UR26+T Voltage Supervisors applications.

• Household appliances
• Electric heating appliances
• External alarm
• Rechargeable batteries
• Set top box
• FPGA design
• Automotive permanent magnet synchronous motors
• Network equipment
• Battery-powered equipment
• Military communications