MAX6462XR17+T Overview

A total of 3 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of SC-70, SOT-323 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. When 3.6V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Surface Mount. Taking into account all of the pins, this power management has a total of 3. 3 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~125°C degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supply current of the power management is 3.5μA. It is always advisable to use MAX6462, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 3.5μA.

MAX6462XR17+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
3.5μA operating supply current

MAX6462XR17+T Applications

There are a lot of Maxim Integrated MAX6462XR17+T Voltage Supervisors applications.

• Radio
• Network equipment
• Solar power charger
• FPGA design
• Power distribution systems of CCU
• DSP
• Unattended substation automation
• Leakage current detection
• emergency room
• Battery cars