MAX6464UR16+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. A supply voltage of 3.6V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. In total, IC powers are 3 pins on the board. 3 pins are on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~125°C TA degrees. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. At the most, voltage supervisor can work with a supply temperature of 3.5μA.
MAX6464UR16+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
MAX6464UR16+ Applications
There are a lot of Maxim Integrated MAX6464UR16+ Voltage Supervisors applications.
- Refrigeration
- Radar
- Satellite navigation
- Military electronics
- Leakage protection
- Important electronics for automotive safety
- Set top box
- Detection of phase sequence
- Computer applications
- Microcontroller system
