MAX6465XR17+T Overview
This power management consists of 3 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find SC-70, SOT-323 functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts in a 3.6V-voltage supply. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. In total, IC powers are 3 pins on the board. There are 3 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~125°C. During operation, this power management system outputs Push-Pull, Totem Pole. The supply current of the power management is 3.5μA. To find similar IC managements from the manufacturer, you can always search by MAX6465. Voltage supervisor can work with a supply temperature of 3.5μA at the most.
MAX6465XR17+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.5μA operating supply current
MAX6465XR17+T Applications
There are a lot of Maxim Integrated MAX6465XR17+T Voltage Supervisors applications.
- Data storage applications
- Radar
- emergency room
- Efficient information transmission
- Leakage current detection
- Urban rail transit weak current power monitoring
- Automotive power systems
- Smart meter
- Satellite navigation
- Medical-specific insulation monitor
