MAX6710QUT+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. This power managment ic consists of 4 channels, each of which can be used independently. There are SOT-23-6 functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts in a 2.5V-voltage supply. Power ics operate at 4 supply voltages. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 6 pins. 6 pins are present on the power management system. Supply voltage (Vsup) should be at least 2V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~85°C TA . Power management has an output of Open Drain or Open Collector during operation. As far as the supply current of the power management is concerned, it is 35μA. A similar IC managements number of the manufacturer can always be found by using MAX6710, the base power ics number. This power management requires 2.5/5V power to work.

MAX6710QUT+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2V
35μA operating supply current

MAX6710QUT+T Applications

There are a lot of Maxim Integrated MAX6710QUT+T Voltage Supervisors applications.

• Microprocessor system
• Dash board
• Detection of phase imbalance
• Detection of phase loss
• Power distribution systems of ICU
• Multi-voltage system
• Precision measurement
• Data storage applications
• Electric heating appliances
• Consumer electronics