MAX6715UTSDD3+T Overview

It is mounted through 6 terminals on the power management. Power management is packaged in a Strip way. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 2 channels. Please refer to power management for SOT-23 functions. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. Power management conducts at a voltage of 2. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 6 pins in it. Pin count of the power management is 6. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. For this power management, there is an 15μA volt supply current. The power management must be powered by 1/5V volts to function properly.

MAX6715UTSDD3+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6715UTSDD3+T Applications

There are a lot of Maxim Integrated MAX6715UTSDD3+T Voltage Supervisors applications.

• Leakage protection
• Microprocessor system
• emergency room
• Utility meter
• Refrigeration
• DVR
• Military electronics
• Cloud computing
• Automotive permanent magnet synchronous motors
• Battery-powered equipment