MAX6719AUTTGD1+T Overview

Power management is mounted through 6 terminals. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. A series of 3 channels can be found on this supervisor. There are SOT-23-6 functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 1V is used to conduct the PMIC chip. IC management conducts in a 3-voltage supply. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. In total, it has 6 pins on IC management. 6 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. There is a supply current of 15μA for the power management. You can always use MAX6719A, the base supervisor number, to search for similar PMICs of the manufacturer. In order to operate this power management, it requires 1/5V volts of power.

MAX6719AUTTGD1+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6719AUTTGD1+T Applications

There are a lot of Maxim Integrated MAX6719AUTTGD1+T Voltage Supervisors applications.

• Leakage current detection
• Kitchen appliances
• Electric heating appliances
• Medical-specific insulation monitor
• Detection of phase imbalance
• Refrigeration
• Functional modules
• Data storage applications
• Important electronics for automotive protection
• Smartphones