MAX6721UTZGD3+T Overview
As you can see, this power management is mounted through 6 terminals. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. There are a total of 2 channels on this supervisor, and they are arranged in a series. For your reference, this PMIC includes a list of SOT-23-6 functions. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 2 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 6 pins on the board. 6 pins are on the supervisor. It is recommended that Vsup should not be less than 800mV for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. For this power management, there is an 15μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6721, the base power ics number. A power supply of 1/5V watts is required for the operation of this power management.
MAX6721UTZGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6721UTZGD3+T Applications
There are a lot of Maxim Integrated MAX6721UTZGD3+T Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Medical-specific insulation monitor
- Detection of phase loss
- Military communications
- Sensitive sensors
- Power communication system
- Data storage applications
- Magnetic resonance imaging
- Stable power system
- Smart meter
