MAX6722AUTWGD3+T Overview
A total of 6 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. Power management consists of 2 channels, each of which can be used independently. Please find attached SOT-23-6 functions for your reference in this IC power. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. Power ics operate at 2 supply voltages. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 6. There are 6 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~125°C degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 15μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6722A, the base power ics number. The power management must be powered by 1/5V volts to function properly.
MAX6722AUTWGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6722AUTWGD3+T Applications
There are a lot of Maxim Integrated MAX6722AUTWGD3+T Voltage Supervisors applications.
- Dash board
- Transformer load monitoring equipment
- DC stabilized power supply module
- Set top box
- Satellite navigation
- Urban rail transit weak current power monitoring
- Electric heating appliances
- Automotive power systems
- Digitally controlled LDO regulators circuit
- Military communications
