6 Terminals 6-Pin MAX6722 Voltage supervisor2 Channels Min 800mV Max 5.5V
SOT-23
MAX6722UTTZD3+T Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
SOT-23-6
Number of Pins
6
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2006
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
6
ECCN Code
EAR99
Type
Multi-Voltage Supervisor
Terminal Finish
Matte Tin (Sn)
Subcategory
Power Management Circuits
Max Power Dissipation
696mW
Technology
BICMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Terminal Pitch
0.95mm
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
MAX6722
Output
Push-Pull, Totem Pole
Pin Count
6
Qualification Status
Not Qualified
Power Supplies
1/5V
Number of Channels
2
Max Supply Voltage
5.5V
Min Supply Voltage
800mV
Operating Supply Current
15μA
Adjustable Threshold
NO
Watchdog Timer
Yes
Reset
Active Low
Voltage - Threshold
2.313V 3.075V
Number of Voltages Monitored
2
Reset Timeout
140ms Minimum
Undervoltage Threshold
2.25V
Overvoltage Threshold
2.375V
Height Seated (Max)
1.45mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
MAX6722UTTZD3+T Product Details
MAX6722UTTZD3+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. This power managment ic consists of 2 channels, each of which can be used independently. As a reference, this IC power includes SOT-23-6 functions for your convenience. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 2 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. The power management system can be categorized as a Power Management Circuits chip. 6 pins are present in total in this power management. 6 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 15μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6722, the base power ics number. There is a requirement for 1/5V power to power this power management.
MAX6722UTTZD3+T Features
Multi-Voltage Supervisor type Minimum supply voltage of 800mV 15μA operating supply current
MAX6722UTTZD3+T Applications
There are a lot of Maxim Integrated MAX6722UTTZD3+T Voltage Supervisors applications.