MAX6723UTWGD3+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 3 channels that can be found. Please find attached SOT-23-6 functions for your reference in this IC power. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3-voltage supply. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 6 pins on the board. This power management has 6 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 15μA. It is always advisable to use MAX6723, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 1/5V power to power this power management.

MAX6723UTWGD3+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6723UTWGD3+T Applications

There are a lot of Maxim Integrated MAX6723UTWGD3+T Voltage Supervisors applications.

• Military communications
• Medical-specific isolation transformer
• Analog circuit
• Power communication system
• Fire equipment power monitoring system
• Leakage current detection
• Satellite navigation
• FPGA design
• Low voltage/high power - AI, GPU
• Smartphones