MAX6727AKASHD3+T Overview

Power management is mounted through 8 terminals. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. Power management consists of 3 channels, each of which can be used independently. As a reference, this IC power includes SOT-23-8 functions for your convenience. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. Power ics operate at 3 supply voltages. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 8 pins are located on this power management. 8 pins make up the power management. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C. Power management has an output of Open Drain or Open Collector during operation. The power management's supply current is 15μA. You can always use MAX6727A, the base supervisor number, to search for similar PMICs of the manufacturer. It requires 1/5V watts of power to operate this voltage supervisor.

MAX6727AKASHD3+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6727AKASHD3+T Applications

There are a lot of Maxim Integrated MAX6727AKASHD3+T Voltage Supervisors applications.

• Important electronics for automotive safety
• Consumer electronics
• Network equipment
• Leakage current detection
• Leakage protection
• Set top box
• Transformer load monitoring equipment
• Medical-specific insulation monitor
• Computer applications
• DVR