MAX6729AKAVHD3+ Overview

As you can see, this power management is mounted through 8 terminals. In this PMIC, you can find SOT-23-8 functions for your reference. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. The package peak reflow temperature is specified to be 225. IC management is possible to find a succession of 3 voltages that have been checked. Surface Mount mounts IC management. The power management system can be categorized as a Power Management Circuits chip. Power managment ic pin count is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The power management must be powered by 1/5V volts to function properly. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 39μA.

MAX6729AKAVHD3+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV

MAX6729AKAVHD3+ Applications

There are a lot of Maxim Integrated MAX6729AKAVHD3+ Voltage Supervisors applications.

• DC stabilized power supply module
• Important electronics for automotive protection
• Consumer electronics
• Sensitive sensors
• Power communication system
• Detection of phase sequence
• Data storage applications
• Smart meter
• Radio
• Important electronics for automotive safety