MAX6731AUTYD3+T Overview

As you can see, this power management is mounted through 6 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. When 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. It has a total of 6 pins that are attached to IC management. Pin count of the power management is 6. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~125°C. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The power management's supply current is 15μA. It is always advisable to use MAX6731A, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6731AUTYD3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6731AUTYD3+T Applications

There are a lot of Maxim Integrated MAX6731AUTYD3+T Voltage Supervisors applications.

• Military electronics
• Battery-powered equipment
• Rechargeable batteries
• Transformer load monitoring equipment
• Power distribution systems of CCU
• Urban rail transit weak current power monitoring
• Microprocessor system
• DSP
• Radar
• Medical-specific insulation monitor