MAX6732AUTSDD3+T Overview

Power management is mounted through 6 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SOT-23-6 functions for you to refer to. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Power management conducts at a voltage of 2. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 6 pins on the board. 6 pins are present on the power management system. It is recommended that Vsup should not be less than 800mV for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~125°C . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For this power management, there is an 15μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6732A, which is the base power ics number. To operate this power management, you will need at least 1/5V volts of power.

MAX6732AUTSDD3+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6732AUTSDD3+T Applications

There are a lot of Maxim Integrated MAX6732AUTSDD3+T Voltage Supervisors applications.

• Transformer load monitoring equipment
• DC stabilized power supply module
• Magnetic resonance imaging
• Microcontroller system
• Refrigeration
• Cloud computing
• Electronics installed in the vehicle
• Embedded computing
• FPGA design
• Set top box