MAX6733AUTSYD3+T Overview
This power management consists of 6 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. In this IC management you will find SOT-23-6 functions for you to refer to. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. Power ics operate at 2 supply voltages. Surface Mount is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 6 pins on the board. 6 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C . During operation, this power management system outputs Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 15μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by MAX6733A. It requires 1/5V watts of power to operate this voltage supervisor.
MAX6733AUTSYD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6733AUTSYD3+T Applications
There are a lot of Maxim Integrated MAX6733AUTSYD3+T Voltage Supervisors applications.
- Smart meter
- Detection of phase loss
- Leakage current detection
- Precision measurement
- Radar
- Smartphones
- Military communications
- Important electronics for automotive protection
- Data storage applications
- Radio
