MAX6734AKARVD3+T Overview

This power management consists of 8 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for SOT-23-8 functions. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. Power management conducts at a voltage of 3. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. In total, it has 8 pins on IC management. There are 8 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. For this power management, there is an 15μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6734A, which is the base power ics number. A power supply of 1/5V watts is required for the operation of this power management.

MAX6734AKARVD3+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6734AKARVD3+T Applications

There are a lot of Maxim Integrated MAX6734AKARVD3+T Voltage Supervisors applications.

• Digitally controlled LDO regulators circuit
• Dash board
• Detection of phase imbalance
• Radio
• Smart meter
• Microcontroller system
• Radar
• Important electronics for automotive protection
• Functional modules
• Leakage protection