MAX6735AKAVHD3+T Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for SOT-23-8 functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. Power management conducts at a voltage of 3. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 8 pins in it. This power management system has 8 pins. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~125°C. Power management has an output of Push-Pull, Totem Pole during operation. It is estimated that the voltage supervisor's supply current is 15μA. It is always advisable to use MAX6735A, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 1/5V volts of power.
MAX6735AKAVHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6735AKAVHD3+T Applications
There are a lot of Maxim Integrated MAX6735AKAVHD3+T Voltage Supervisors applications.
- FPGA design
- Power distribution systems of ICU
- Fire equipment power monitoring system
- Microcontroller system
- Solar power charger
- Insulation fault location system
- Military communications
- Embedded computing
- Electric heating appliances
- Power distribution systems of operating room
