MAX6754UKWD0+T Overview
As you can see, this power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 3.6V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 5 pins are located on this power management. This power management system has 5 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 13μA. A similar IC managements number of the manufacturer can always be found by using MAX6754, the base power ics number.
MAX6754UKWD0+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
13μA operating supply current
MAX6754UKWD0+T Applications
There are a lot of Maxim Integrated MAX6754UKWD0+T Voltage Supervisors applications.
- Multi-voltage system
- Display equipment
- Data storage applications
- Electric heating appliances
- Dash board
- Telecommunications equipment
- Detection of phase imbalance
- Power distribution systems of ICU
- Linux and server computing
- Military electronics
