MAX6755UKLD0+T Overview

There are 5 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 1.4V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 5 pins in it. Pin count of the power management is 5. It is recommended that Vsup should not be less than 1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. Supplied with a operating current of 13μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6755, which is the base power ics number.

MAX6755UKLD0+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
13μA operating supply current

MAX6755UKLD0+T Applications

There are a lot of Maxim Integrated MAX6755UKLD0+T Voltage Supervisors applications.

• Stable power system
• Radio
• Power distribution systems of CCU
• Insulation fault location system
• Microprocessor system
• WiFi router
• Fire equipment power monitoring system
• Medical-specific isolation transformer
• Detection of phase imbalance
• Military electronics