MAX6760TATZD3+T Overview
Power management is mounted through 8 terminals. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 2 channels that can be found. The purpose of this IC power is to provide you with a reference of 8-WDFN Exposed Pad functions. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3.6V is used to conduct the PMIC chip. Power ics operate at 2 supply voltages. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 8 pins that are attached to IC management. Power managment ic pin count is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~125°C. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 13μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to MAX6760, the base PMIC number.
MAX6760TATZD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
13μA operating supply current
MAX6760TATZD3+T Applications
There are a lot of Maxim Integrated MAX6760TATZD3+T Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Leakage protection
- Embedded computing
- Dash board
- Consumer electronics
- Insulation fault location system
- Automotive permanent magnet synchronous motors
- Detection of phase sequence
- Radio
- Automotive power systems
