MAX6760TAWAD0+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. Power management consists of 2 channels, each of which can be used independently. In this IC management you will find 8-WDFN Exposed Pad functions for you to refer to. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. When 3.6V is applied to the power ic, it conducts. IC management conducts in a 2-voltage supply. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 8. 8 pins make up the power management. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Power management recommends the Surface Mount mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 13μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6760, which is the base power ics number.

MAX6760TAWAD0+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
13μA operating supply current

MAX6760TAWAD0+T Applications

There are a lot of Maxim Integrated MAX6760TAWAD0+T Voltage Supervisors applications.

• Telecommunications equipment
• Battery cars
• Personal computers
• Military communications
• Detection of phase loss
• Military electronics
• Medical-specific insulation monitor
• Dash board
• Smart meter
• Precision measurement