MAX6760TAZWD0+T Overview

A total of 8 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 2 channels that can be found. The purpose of this IC power is to provide you with a reference of 8-WDFN Exposed Pad functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts at a voltage of 3.6V. In a 2 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. There are a total of 8 pins on power management. This power management has 8 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C . While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 13μA volt supply current. You can always use MAX6760, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6760TAZWD0+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
13μA operating supply current

MAX6760TAZWD0+T Applications

There are a lot of Maxim Integrated MAX6760TAZWD0+T Voltage Supervisors applications.

• Refrigeration
• Display equipment
• Functional modules
• Precision measurement
• Power distribution systems of operating room
• Power distribution systems of ICU
• Digitally controlled LDO regulators circuit
• Insulation fault location system
• Sensitive sensors
• Electric heating appliances