MAX6762TAZAD0+T Overview

This power management consists of 8 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 2 channels that can be found. Please find attached 8-WDFN Exposed Pad functions for your reference in this IC power. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 3.6V supply voltages. Power management conducts at a voltage of 2. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. There are 8 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The supply voltage (Vsup) should not exceed 6V volts in this IC power. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~125°C. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The power management's supply current is 13μA. You can always use MAX6762, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6762TAZAD0+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
13μA operating supply current

MAX6762TAZAD0+T Applications

There are a lot of Maxim Integrated MAX6762TAZAD0+T Voltage Supervisors applications.

• Solar power charger
• Electronics installed in the vehicle
• Refrigeration
• Consumer electronics
• Important electronics for automotive safety
• Telecommunications equipment
• Display equipment
• Unattended substation automation
• Important electronics for automotive protection
• Medical-specific insulation monitor