MAX6762TAZAD3+T Overview

There are 8 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. There are a total of 2 channels on this supervisor, and they are arranged in a series. Please refer to power management for 8-WDFN Exposed Pad functions. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 3.6V is used to conduct the PMIC chip. IC management is possible to find a succession of 2 voltages that have been checked. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 8. The pins of the power management system count 8. It is recommended that Vsup should not be less than 1V for this IC power. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. As far as the supply current of the power management is concerned, it is 13μA. A similar IC managements number of the manufacturer can always be found by using MAX6762, the base power ics number.

MAX6762TAZAD3+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
13μA operating supply current

MAX6762TAZAD3+T Applications

There are a lot of Maxim Integrated MAX6762TAZAD3+T Voltage Supervisors applications.

• Transformer load monitoring equipment
• Smart meter
• Kitchen appliances
• Multi-voltage system
• DSP
• Automotive permanent magnet synchronous motors
• Medical-specific isolation transformer
• Detection of phase loss
• FPGA design
• Leakage current detection