MAX6773BTALD0+T Overview
It is mounted through 8 terminals on the power management. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of 8-WDFN Exposed Pad functions. Several of the benefits of this PMIC are also shared by other Regulator/Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. There is a voltage supply of 14V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. In total, the power management has 8 pins in it. 8 pins are present on the power management system. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. There are other features such as RESET THRESHOLD VOLTAGE IS 4.625V to name a few. A similar IC managements number of the manufacturer can always be found by using MAX6773, the base power ics number.
MAX6773BTALD0+T Features
Regulator/Supervisor type
MAX6773BTALD0+T Applications
There are a lot of Maxim Integrated MAX6773BTALD0+T Voltage Supervisors applications.
- Functional modules
- Magnetic resonance imaging
- Power distribution systems of CCU
- Fire equipment power monitoring system
- FPGA design
- Transformer load monitoring equipment
- Rechargeable batteries
- Automotive permanent magnet synchronous motors
- Digitally controlled LDO regulators circuit
- Medical-specific isolation transformer
