MAX6801UR28D3+T Overview

There are 3 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 5V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 3 pins that are attached to IC management. There are 3 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~125°C. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 5μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6801, which is the base power ics number.

MAX6801UR28D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
5μA operating supply current

MAX6801UR28D3+T Applications

There are a lot of Maxim Integrated MAX6801UR28D3+T Voltage Supervisors applications.

• Functional modules
• Power distribution systems of infant care room
• DVR
• Detection of phase imbalance
• Consumer electronics
• Electrical fire monitoring system
• Cloud computing
• Insulation fault location system
• Battery cars
• Microcontroller system