MAX6801UR46D3+T Overview

This power management consists of 3 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 5V volt supply. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 3. This power management has 3 pins. It is recommended that Vsup should not be less than 700mV for this IC power. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. It is estimated that the voltage supervisor's supply current is 5μA. A similar IC managements number of the manufacturer can always be found by using MAX6801, the base power ics number.

MAX6801UR46D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
5μA operating supply current

MAX6801UR46D3+T Applications

There are a lot of Maxim Integrated MAX6801UR46D3+T Voltage Supervisors applications.

• Important electronics for automotive safety
• Kitchen appliances
• Radio
• Microprocessor system
• Refrigeration
• DVR
• Smart meter
• Consumer electronics
• Insulation fault location system
• Personal computers