MAX6803US29D3+T Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. Please refer to power management for TO-253-4, TO-253AA functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 5V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. There are a total of 4 pins on power management. 4 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a 5μA supply current present in the power management. You can always use MAX6803, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6803US29D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
5μA operating supply current

MAX6803US29D3+T Applications

There are a lot of Maxim Integrated MAX6803US29D3+T Voltage Supervisors applications.

• Radar
• Leakage current detection
• Battery-powered equipment
• Cloud computing
• Precision measurement
• DVR
• Low voltage/high power - AI, GPU
• Display equipment
• Refrigeration
• emergency room