MAX6808SA46+ Overview

A total of 8 terminals are used to mount this power management. In terms of packaging, power management follows the Tube model. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. IC management conducts at a voltage of 5V. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. The total number of pins on this power management is 8. 8 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 50μA. A similar IC managements number of the manufacturer can always be found by using MAX6808, the base power ics number.

MAX6808SA46+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
50μA operating supply current

MAX6808SA46+ Applications

There are a lot of Maxim Integrated MAX6808SA46+ Voltage Supervisors applications.

• Magnetic resonance imaging
• Military electronics
• Power distribution systems of infant care room
• Fire equipment power monitoring system
• Detection of phase sequence
• Set top box
• Battery cars
• External alarm
• Microcontroller system
• Leakage current detection