MAX6823LUK+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1.5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 5 pins on the board. There are 5 pins on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 10μA. For similar manage ics search of the manufacturer, you can always refer to MAX6823, the base PMIC number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate.

MAX6823LUK+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current

MAX6823LUK+T Applications

There are a lot of Maxim Integrated MAX6823LUK+T Voltage Supervisors applications.

• Electric heating appliances
• Personal computers
• Smart meter
• Efficient information transmission
• Transformer load monitoring equipment
• Electrical fire monitoring system
• Power communication system
• Microprocessor system
• Kitchen appliances
• Refrigeration