MAX6842DUKD3+T Overview

It is mounted through 5 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When 0.9V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 5. Power managment ic pin count is 5. Supply voltage (Vsup) should be at least 750mV for this power management. Voltage (Vsup) shouldn't exceed 1.8V volts in this PMIC. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain, Push-Pull. As far as the supply current of the power management is concerned, it is 8.1μA. To find similar IC managements from the manufacturer, you can always search by MAX6842.

MAX6842DUKD3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
8.1μA operating supply current

MAX6842DUKD3+T Applications

There are a lot of Maxim Integrated MAX6842DUKD3+T Voltage Supervisors applications.

• Kitchen appliances
• Efficient information transmission
• Analog circuit
• Satellite navigation
• Embedded computing
• Medical-specific insulation monitor
• Electronics installed in the vehicle
• Battery cars
• Low voltage/high power - AI, GPU
• Automotive permanent magnet synchronous motors