MAX6848KARD3+ Overview
This package corresponds to SOT-23. POWER SUPPLY SUPPORT CIRCUIT is the analog IC used by this power management IC. It is possible to access 1 channels. The smart tools battery has 8 pins in total. A Bulk case holds it. Mount this electronic part using Surface Mount. It is recommended that this electric part's minimum supply voltage not be less than 1.6V volts. 5.5V voltage greater than 5.5V volts should be supplied to this electronic battery. You cannot activate this smart tools battery if it is less than -40°C. The electronic battery should be used below 85°C degrees Celsius. All times this battery protection IC should be set to 3.6V. 8 pins are present on it. There should be a voltage below 630mV as the minimum reset threshold voltage for the battery protector ic. Power ICs should have a reset threshold voltage above 600mV.
MAX6848KARD3+ Features
Available in SOT-23 Package
with 8 Pins
operate supply voltage at the range of 3.6V
The Min Reset Threshold Voltage at 600mV
MAX6848KARD3+ Applications
There are a lot of Maxim Integrated
MAX6848KARD3+ Battery Management ICs applications.
- Electric-powered machinery
- Fork lifts
- Grid power infrastructure
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
