MAX6855UK23D2+T Overview

A total of 5 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 2.5V. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 5 pins. Pin count of the power management is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MAX6855, the base power ics number.

MAX6855UK23D2+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6855UK23D2+T Applications

There are a lot of Maxim Integrated MAX6855UK23D2+T Voltage Supervisors applications.

• Medical-specific isolation transformer
• Important electronics for automotive protection
• DC stabilized power supply module
• Network equipment
• Set top box
• Precision measurement
• Leakage protection
• Data storage applications
• Cloud computing
• Multi-voltage system