MAX6855UK23D3+T Overview
This power management consists of 5 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. Manage ics operate at 2.5V supply voltages. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 5 pins. 5 pins make up the power management. IC management can only work with a supply voltage of 1.1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The power management's supply current is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6855, the base power ics number.
MAX6855UK23D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK23D3+T Applications
There are a lot of Maxim Integrated MAX6855UK23D3+T Voltage Supervisors applications.
- Detection of phase imbalance
- WiFi router
- Utility meter
- Radio
- DVR
- Rechargeable batteries
- DSP
- Important electronics for automotive protection
- Battery-powered equipment
- Personal computers
