MAX6855UK26D2+T Overview
Power management is mounted through 5 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 2.5V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 5 pins in it. Pin count of the power management is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. As far as the supply current of the power management is concerned, it is 7μA. It is always advisable to use MAX6855, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6855UK26D2+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK26D2+T Applications
There are a lot of Maxim Integrated MAX6855UK26D2+T Voltage Supervisors applications.
- Important electronics for automotive protection
- Medical-specific insulation monitor
- Utility meter
- Automotive power systems
- Network equipment
- WiFi router
- Leakage current detection
- Smartphones
- Household appliances
- FPGA design
