MAX6855UK28D1+T Overview
A total of 5 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 5 pins. There are 5 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. For this power management, there is an 7μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to MAX6855, the base PMIC number.
MAX6855UK28D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK28D1+T Applications
There are a lot of Maxim Integrated MAX6855UK28D1+T Voltage Supervisors applications.
- Satellite navigation
- Power distribution systems of operating room
- Military electronics
- Detection of phase sequence
- Kitchen appliances
- Radio
- Automotive power systems
- Smart meter
- Important electronics for automotive protection
- Telecommunications equipment
