MAX6855UK29D3+T Overview

As you can see, this power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 2.5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 5 pins. There are 5 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supply current of the power management is 7μA. For similar manage ics search of the manufacturer, you can always refer to MAX6855, the base PMIC number.

MAX6855UK29D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6855UK29D3+T Applications

There are a lot of Maxim Integrated MAX6855UK29D3+T Voltage Supervisors applications.

• Digitally controlled LDO regulators circuit
• Automotive permanent magnet synchronous motors
• Detection of phase sequence
• Battery cars
• Network equipment
• Data storage applications
• Radio
• Consumer electronics
• Smart meter
• Household appliances