MAX6855UK39D3+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. IC management conducts in a 2.5V-voltage supply. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. The pins of the power management system count 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by MAX6855.

MAX6855UK39D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6855UK39D3+T Applications

There are a lot of Maxim Integrated MAX6855UK39D3+T Voltage Supervisors applications.

• Consumer electronics
• Battery cars
• emergency room
• DSP
• Stable power system
• Multi-voltage system
• Dash board
• DVR
• Fire equipment power monitoring system
• Smart meter