MAX6855UK45D1+T Overview

A total of 5 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for SC-74A, SOT-753 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 2.5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. 5 pins are present in total in this power management. 5 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. As far as the supply current of the power management is concerned, it is 7μA. It is always advisable to use MAX6855, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6855UK45D1+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6855UK45D1+T Applications

There are a lot of Maxim Integrated MAX6855UK45D1+T Voltage Supervisors applications.

• Kitchen appliances
• Detection of phase sequence
• Insulation fault location system
• Sensitive sensors
• Radio
• Smartphones
• Analog circuit
• Leakage current detection
• Power distribution systems of infant care room
• Magnetic resonance imaging