MAX6860UK25D3+T Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When 2.5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 5 pins on the board. This power management has 5 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~85°C TA . During operation, this power management system outputs Open Drain or Open Collector. There is a supply current of 7μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6860, the base power ics number.

MAX6860UK25D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6860UK25D3+T Applications

There are a lot of Maxim Integrated MAX6860UK25D3+T Voltage Supervisors applications.

• External alarm
• Military electronics
• DVR
• Detection of phase imbalance
• Efficient information transmission
• Radar
• Electronics installed in the vehicle
• Urban rail transit weak current power monitoring
• Unattended substation automation
• Insulation fault location system