MAX6864UK16D1S+T Overview

Power management is mounted through 5 terminals. This power ic is packaged in a way that looks like a Strip. There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. In this IC management you will find SOT-23-5 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 2.5V. Power management conducts at a voltage of 1. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 5 pins on the board. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The power management's supply current is 7μA.

MAX6864UK16D1S+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6864UK16D1S+T Applications

There are a lot of Maxim Integrated MAX6864UK16D1S+T Voltage Supervisors applications.

• Microcontroller system
• Power distribution systems of operating room
• Detection of phase loss
• Military electronics
• Unattended substation automation
• Microprocessor system
• Battery cars
• Detection of phase imbalance
• Military communications
• Power distribution systems of ICU