MAX6865UK19D3L+T Overview

As you can see, this power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 2.5V. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. There are 5 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6865UK19D3L+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK19D3L+T Applications

There are a lot of Maxim Integrated MAX6865UK19D3L+T Voltage Supervisors applications.

• Fire equipment power monitoring system
• Utility meter
• Rechargeable batteries
• Power communication system
• Analog circuit
• Battery-powered equipment
• Dash board
• DSP
• Electronics installed in the vehicle
• Multi-voltage system