Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX6865UK23D2L+T

MAX6865UK23D2L+T

MAX6865UK23D2L+T

Maxim Integrated

2.5V5 Terminals 5-Pin MAX6865 Voltage supervisor1 Channels Min 1.1V Max 5.5V

SOT-23

MAX6865UK23D2L+T Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish MATTE TIN
Subcategory Power Management Circuits
Max Power Dissipation 571mW
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
[email protected] Reflow Temperature-Max (s) 40
Base Part Number MAX6865
Output Push-Pull, Totem Pole
Pin Count 5
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.1V
Operating Supply Current 7μA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active High
Voltage - Threshold 2.313V
Number of Voltages Monitored 1
Reset Timeout 40ms Minimum
Min Reset Threshold Voltage 2.255V
Max Reset Threshold Voltage 2.371V
Undervoltage Threshold 2.255V
Overvoltage Threshold 2.371V
Length 2.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
MAX6865UK23D2L+T Product Details

MAX6865UK23D2L+T Overview


As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 5 pins are located on this power management. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 7μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.

MAX6865UK23D2L+T Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK23D2L+T Applications


There are a lot of Maxim Integrated MAX6865UK23D2L+T Voltage Supervisors applications.

  • Electronics installed in the vehicle
  • Power distribution systems of ICU
  • Power distribution systems of infant care room
  • Multi-voltage system
  • Network equipment
  • Battery-powered equipment
  • Electric heating appliances
  • Rechargeable batteries
  • Battery cars
  • Dash board

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News