MAX6865UK23D2S+T Overview

There are 5 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 2.5V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. This power management has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 7μA. To find similar IC managements from the manufacturer, you can always search by MAX6865.

MAX6865UK23D2S+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK23D2S+T Applications

There are a lot of Maxim Integrated MAX6865UK23D2S+T Voltage Supervisors applications.

• Kitchen appliances
• DVR
• FPGA design
• Important electronics for automotive safety
• Electric heating appliances
• Power distribution systems of infant care room
• Magnetic resonance imaging
• Network equipment
• Smart meter
• Digitally controlled LDO regulators circuit