MAX6865UK25D2S+T Overview
This power management consists of 5 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. Please refer to power management for SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. In a 2.5V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 5. There are 5 pins on the power managment ic. IC management can only work with a supply voltage of 1.1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK25D2S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK25D2S+T Applications
There are a lot of Maxim Integrated MAX6865UK25D2S+T Voltage Supervisors applications.
- Efficient information transmission
- WiFi router
- Battery cars
- Dash board
- Fire equipment power monitoring system
- FPGA design
- Personal computers
- Detection of phase loss
- Satellite navigation
- Power distribution systems of CCU
