MAX6865UK26D5S+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. Please refer to power management for SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 2.5V-voltage supply. Power ics operate at 1 supply voltages. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 5 pins in it. There are 5 pins on the power managment ic. Supply voltage (Vsup) should be at least 1.1V for this power management. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a 7μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.

MAX6865UK26D5S+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK26D5S+T Applications

There are a lot of Maxim Integrated MAX6865UK26D5S+T Voltage Supervisors applications.

• Power distribution systems of operating room
• Embedded computing
• Display equipment
• Automotive power systems
• Radio
• WiFi router
• External alarm
• Transformer load monitoring equipment
• Detection of phase loss
• Efficient information transmission