MAX6865UK27D5S+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 2.5V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. 5 pins are present in total in this power management. This power management system has 5 pins. IC management can only work with a supply voltage of 1.1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supervisor's supply current is specified to 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.

MAX6865UK27D5S+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK27D5S+T Applications

There are a lot of Maxim Integrated MAX6865UK27D5S+T Voltage Supervisors applications.

• Microcontroller system
• Magnetic resonance imaging
• Utility meter
• Radio
• Digitally controlled LDO regulators circuit
• Consumer electronics
• Battery-powered equipment
• Rechargeable batteries
• Power distribution systems of infant care room
• Automotive permanent magnet synchronous motors