MAX6865UK33D3L+T Overview

As you can see, this power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 2.5V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 5 pins are present in total in this power management. There are 5 pins on the power managment ic. It is recommended that Vsup should not be less than 1.1V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The power management's supply current is 7μA. You can always use MAX6865, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6865UK33D3L+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK33D3L+T Applications

There are a lot of Maxim Integrated MAX6865UK33D3L+T Voltage Supervisors applications.

• emergency room
• FPGA design
• DC stabilized power supply module
• Computer applications
• WiFi router
• Telecommunications equipment
• Unattended substation automation
• Satellite navigation
• Multi-voltage system
• Electronics installed in the vehicle