MAX6865UK38D1L+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 2.5V. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 5 pins. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK38D1L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK38D1L+T Applications
There are a lot of Maxim Integrated MAX6865UK38D1L+T Voltage Supervisors applications.
- Electronics installed in the vehicle
- Precision measurement
- Satellite navigation
- Multi-voltage system
- Utility meter
- Data storage applications
- Electric heating appliances
- External alarm
- Consumer electronics
- Stable power system
